Information Center Configuration Examples - 3Com 4210 PWR Configuration Manual

Information Center
Configuration
Examples
Log Output to a UNIX
Log Host
Table 353 Display and maintain information center
Operation
Display information on an
information channel
Display the operation status of
information center, the
configuration of information
channels, the format of time
stamp
Display the status of log
buffer and the information
recorded in the log buffer
Display the summary
information recorded in the
log buffer
Display the status of trap
buffer and the information
recorded in the trap buffer
Clear information recorded in
the log buffer
Clear information recorded in
the trap buffer
Network requirements
The switch sends the following log information to the Unix log host whose IP
address is 202.38.1.10: the log information of the two modules ARP and IP, with
severity higher than "informational".
Network diagram
Figure 153 Network diagram for log output to a Unix log host
Switch
Configuration procedure
1 Configure the switch:
# Enable the information center.
<Switch> system-view
[Switch] info-center enable
# Disable the function of outputting information to log host channels.
[Switch] undo info-center source default channel loghost

Information Center Configuration Examples

Command
display channel [
channel-number |
channel-name ]
display info-center [ unit
unit-id ]
display logbuffer [ unit
unit-id ] [ level severity | size
buffersize ]* [ | { begin |
exclude | include }
regular-expression ]
display logbuffer summary
[ level severity ]
display trapbuffer [ unit
unit-id ] [ size buffersize ]
reset logbuffer [ unit unit-id
]
reset trapbuffer [ unit
unit-id ]
Internet
Description
Available in any view
Available in user view
PC
463