3Com 4210 PWR Configuration Manual page 28

9/18/26 port and pwr 9/18/26 port 4210 series switch
Table of Contents

Advertisement

26
C
2: L
HAPTER
OGGING INTO AN
Common Configurations
Console Port Login
Configurations for
Different Authentication
Modes
E
S
THERNET
WITCH
Table 12 lists the common configurations of Console port login.
Table 12 Common configuration of Console port login
Configuration
Console port
configuration
AUX user
interface
configuration
Terminal
configuration
c
CAUTION: The change to Console port configuration takes effect immediately, so
the connection may be disconnected when you log in through a Console port and
then configure this Console port. To configure a console port, you are
recommended to log into the switch in other ways. To log into a switch through its
Console port after you modify the Console port settings, you need to modify the
corresponding settings of the terminal emulation utility running on your PC
accordingly in the dialog box shown in Figure 4.
Table 13 lists Console port login configurations for different authentication modes.
Table 13 Console port login configurations for different authentication modes
Authentication
mode
None
Baud rate
Optional
The default baud rate is 19,200 bps.
Check mode
Optional
By default, the check mode of the Console port is set
to "none", which means no check bit.
Stop bits
Optional
The default stop bits of a Console port is 1.
Data bits
Optional
The default data bits of a Console port is 8.
Configure the
Optional
command level
By default, commands of level 3 are available to the
available to the
users logging into the AUX user interface.
users logging into
the AUX user
interface
Make terminal
Optional
services available
By default, terminal services are available in all user
interfaces
Set the maximum
Optional
number of lines
By default, the screen can contain up to 24 lines.
the screen can
contain
Set history
Optional
command buffer
By default, the history command buffer can contain up
size
to 10 commands.
Set the timeout
Optional
time of a user
The default timeout time is 10 minutes.
interface
Console port login configuration
Perform common
Perform common
configuration
configuration for
Console port login
Remarks
Remarks
Optional
Refer to Table 12.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents