3Com 4210 PWR Configuration Manual page 454

452 C 40: I
HAPTER NFORMATION
n
C
ENTER
If the threshold is set to 1, only information with the severity being
■
emergencies will be output;
If the threshold is set to 8, information of all severities will be output.
■
Ten channels and six output directions of system information
The system supports six information output directions, including the Console,
Monitor terminal (monitor), logbuffer, loghost, trapbuffer and SNMP.
The system supports ten channels. The channels 0 through 5 have their default
channel names and are associated with six output directions by default. Both the
channel names and the associations between the channels and output directions
can be changed through commands.
Table 339 Information channels and output directions
Information channel
number
0
1
2
3
4
5
6
7
8
9
Configurations for the six output directions function independently and take effect
only after the information center is enabled.
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel6
channel7
channel8
channel9
Default output direction
Console (Receives log, trap
and debugging information)
Monitor terminal (Receives
log, trap and debugging
information, facilitating
remote maintenance)
Log host (Receives log, trap
and debugging information
and information will be stored
in files for future retrieval.)
Trap buffer (Receives trap
information, a buffer inside
the device for recording
information.)
Log buffer (Receives log
information, a buffer inside
the device for recording
information.)
SNMP NMS (Receives trap
information)
Not specified (Receives log,
trap, and debugging
information)
Not specified (Receives log,
trap, and debugging
information)
Not specified (Receives log,
trap, and debugging
information)
Not specified (Receives log,
trap, and debugging
information)