Commands and settings needed for the OmniSwitch 6800/6850/9000 can be contained in an ASCII-based
configuration text file. Configuration files can be created in several ways and are useful in network
environments where multiple switches must be managed and monitored.
This chapter describes how configuration files are created, how they are applied to the switch, and how
they can be used to enhance OmniSwitch usability.
In This Chapter
Configuration procedures described in this chapter include:
•
•
•
•
•
OmniSwitch 6800/6850/9000 Switch Management Guide
6 Working With
Configuration Files
December 2007
page 6-1