Alcatel-Lucent OmniSwitch 6800 Series Management Manual page 243

Using SNMP
No. Trap Name
11 chassisTrapsStateChange
physicalIndex—The physical index of the involved object.
chassisTrapsObjectType—An enumerated value that provides the object type involved in the alert trap.
chassisTrapsObjectNumber—A number defining the order of the object in the set (e.g., the number of the
considered fan or power supply). This intends to clarify as much as possible the location of the failure or alert.
An instance of the appearance of the trap could be "failure on a module. Power supply 3".
chasEntPhysOperStatus—An enumerated value that indicates the operational status of installed modules
(includes empty slots).
12 chassisTrapsMacOverlap
physicalIndex—The physical index of the involved object.
chasTrapMacRangeIndex—The MAC range index of the involved object.
13 vrrpTrapNewMaster
vrrpOperMasterIpAddr—The master router's real (primary) IP address. This is the IP address listed as the
source in the VRRP advertisement last received by this virtual router.
14 vrrpTrapAuthFailure
vrrpTrapPacketSrc—The IP address of an inbound VRRP packet.
vrrpTrapAuthErrorType—Potential types of configuration conflicts.
OmniSwitch 6800/6850/9000 Switch Management Guide
Objects Family
physicalIndex chassis
chassisTrap-
sObjectType
chassisTrap-
sObjectNum-
ber
chasEntPhys-
OperStatus
physicalIndex module
chasTrapMac-
RangeIndex
vrrpOperMas- vrrp
terIpAddr
vrrpTrapPack- vrrp
etSrc
vrrpTrapAuth-
ErrorType
December 2007
SNMP Overview
Description
An NI status change was
detected.
A MAC range overlap was found
in the backplane eeprom.
The SNMP agent has transferred
from the backup state to the mas-
ter state.
A packet was received from the
network whose authentication
key conflicts with the switch's
authentication key or type.
page 10-13