Alcatel-Lucent OmniSwitch 6800 Series Management Manual page 248

Hide thumbs Also See for OmniSwitch 6800 Series:
Table of Contents

Advertisement

SNMP Overview
No. Trap Name
27
stpRootPortChange
vStpNumber—The Spanning Tree number identifying this instance.
vStpRootPortNumber—The port ifindex of the port which offers the lowest cost path from this bridge to the
root bridge for this spanning tree instance.
28
mirrorConfigError
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
mirroringSlot—Slot of mirroring interface.
mirroringPort—Port of mirroring interface.
mirMonErrorNi—The NI slot number.
mirMonError—The Error returned by the NI which failed to configure Mirroring/Monitoring.
29
mirrorUnlikeNi
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
mirroringSlot—Slot of mirroring interface.
mirroringPort—Port of mirroring interface.
mirMonErrorNi—The NI slot number.
mirMonError—The Error returned by the NI which failed to configure Mirroring/Monitoring.
30
slPCAMStatusTrap
slPCAMSlotNumber—The slot number of this Coronado switching/routing ASIC.
slPCAMSliceNumber—The slice number of this Coronado switching/routing ASIC.
slPCAMStatus—The Layer 2 pesudoCAM status of this Coronado switching/routing ASIC.
31
unused
32
unused
page 10-18
Objects
vStpNumber
vStpRootPort-
Number
mirmonPrima-
rySlot
mirmonPrima-
ryPort
mirroringSlot
mirroringPort
mirMonErrorNi
mirMonError
mirmonPrima-
rySlot
mirmonPrima-
ryPort
mirroringSlot
mirroringPort
mirMonErrorNi
slPCAMSlot-
Number
slPCAMSlice-
Number
slPCAMStatus
N/A
N/A
OmniSwitch 6800/6850/9000 Switch Management Guide
Family
Description
stp
A root port has changed for a
spanning tree bridge. The root
port is the port that offers the
lowest cost path from this bridge
to the root bridge.
pmm
The mirroring configuration
failed on an NI. This trap is sent
when any NI fails to configure
mirroring. Due to this error, port
mirroring session will be termi-
nated.
pmm
The mirroring configuration is
deleted due to the swapping of
different NI board type. The Port
Mirroring session which was
active on a slot cannot continue
with the insertion of different NI
type in the same slot.
bridge
The trap status of the Layer 2
pesudoCAM for this NI.
N/A
N/A
Using SNMP
December 2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6850 seriesOmniswitch 9000 series

Table of Contents