Webview Cli Defaults; Browser Setup - Alcatel-Lucent OmniSwitch 6800 Series Management Manual

WebView CLI Defaults

WebView CLI Defaults
Web Management Command Line Interface (CLI) commands allow you to enable/disable WebView,
enable/disable Secure Socket Layer (SSL), and view basic WebView parameters. These configuration
options are also available in WebView. The following table lists the defaults for WebView configuration
through the http and https commands
Description
WebView Status
Force SSL
HTTPS port
HTTP port

Browser Setup

Your browser preferences (or options) should be set up as follows:
Cookies should be enabled. Typically this is the default.
•
JavaScript must be enabled/supported.
•
Java must be enabled.
•
Style sheets must be enabled; that is, the colors, fonts, backgrounds, etc. of web pages should always
•
be used (rather than any user-configured settings).
Checking for new versions of pages should be set to "Every time" when your browser opens.
•
If you are using a proxy server, the proxy settings should be configured to bypass the switch on which
•
you are running WebView (the local switch).
Typically many of these settings are configured as the default. Different browsers (and different versions
of the same browser) may have different dialogs for these settings. Check your browser help pages if you
need help.
page 9-2
Command
http server
http ssl
https port
http port
OmniSwitch 6800/6850/9000 Switch Management Guide
Using WebView
Default
enabled
disabled
443
80
December 2007