Alcatel-Lucent OmniSwitch 6800 Series Management Manual page 140

Command Help
The following table contains the first-level commands and their set names as they are listed on the display
screen when you enter a single question mark and press Enter.
Command Set Name
System Service &
File Management
CMM Chassis Supervision COPY, WRITE, POWER, TEMP-THRESHOLD, TAKEOVER,
Source Learning
Spanning Tree
VLAN
Link Aggregation
Miscellaneous
AAA & Configuration
Manager
Interface
IP Routing & Multicast
QoS
Debug
page 5-6
Commands
WHOAMI, WHO, VIEW, VI, VERBOSE, USER, UPDATE, TTY,
TELNET6, TELNET, SYSTEM, SWLOG, SSH6, SSH, SHOW,
SFTP6, SFTP, SESSION, RZ, RMDIR, RM, RENAME, PWD,
PROMPT, NTP, NSLOOKUP, NO, NEWFS, MV, MOVE, MORE,
MODIFY, MKDIR, LS, KILL, IP,
HISTORY, FTP, FSCK, FREESPACE, EXIT, DSHELL, DIR,
DELETE, DEBUG, CP, COMMAND-LOG, CHMOD, CD, AUTO,
ATTRIB, ALIAS
SYSTEM, SHOW, RRM, RPUT, RLS, RGET, RELOAD, RDF,
RCP, NO, DEBUG, CONFIGURE
SOURCE-LEARNING, SHOW, PORT-SECURITY, NO, MAC-
ADDRESS-TABLE, DEBUG
SHOW, BRIDGE
VLAN, SHOW, NO, MAC-ADDRESS-TABLE, DEBUG
STATIC, SHOW, NO, LINKAGG, LACP
HTTP, TRACEROUTE, SNMP, SHOW, RMON, PORT, POLICY,
PING, NO, MAC-RANGE, MAC, LANPOWER, IP, IPV6, ICMP,
HTTPS, HRE, HEALTH, GMAP, DEBUG, CLEAR, ARP, AMAP,
802.1X
USER, SHOW, PASSWORD, NO, END-USER, DEBUG,
CONFIGURATION, AVLAN, AAA
TRAP, SHOW, NO, INTERFACES, FLOW, DEBUG, 10GIG
DEBUG, VRRP3, VRRP, TRACEROUTE6, SHOW, PING6, NO,
IPV6, IP, CLEAR
SHOW, QOS, POLICY, NO, DEBUG
UPDATE, SHOW, NO, DEBUG
OmniSwitch 6800/6850/9000 Switch Management Guide
Using the CLI
December 2007