Managing Switch User Accounts
How User Settings Are Saved
Unlike other settings on the switch, user settings configured through the
are saved to the switch configuration automatically. These settings are saved in real time in the local user
database.
At bootup, the switch reads the database file for user information (rather than the boot.cfg file). The
memory,
copy running-config
user or password settings over a reboot.
Note. Password settings configured through the user password-policy commands are not automatically
saved to the switch configuration.
For information about using the write memory, copy running-config working, and configuration
snapshot commands, see
Configuration Files,"
OmniSwitch 6800/6850/9000 Switch Management Guide
working, or
configuration snapshot
Chapter 4, "Managing CMM Directory Content," Chapter 6, "Working With
and the OmniSwitch CLI Reference Guide.
user
and
commands are not required to save
December 2007
Overview of User Accounts
password
commands
write
page 7-9