Alcatel-Lucent OmniSwitch 6800 Series Management Manual page 252

SNMP Overview
No. Trap Name
48 pethPsePortPowerMaintenanceStatus
pethPsePortPowerMaintenanceStatus—The value ok (1) indicates the Power Maintenance Signature is
present and the overcurrent condition has not been detected. The value overCurrent (2) indicates an overcurrent
condition has been detected. The value mPSAbsent (3) indicates that the Power Maintenance Signature is
absent.
Note: This trap is not supported only on OmniSwitch 6800 and 6850 switches in the current release.
49 pethMainPowerUsageOn
pethMainPseConsumptionPower—Measured usage power expressed in Watts.
Note: This trap is not supported only on OmniSwitch 6800 and 6850 in the current release.
50 pethMainPowerUsageOff
pethMainPseConsumptionPower—Measured usage power expressed in Watts.
Note: This trap is not supported on OmniSwitch 6800 and 6850 in the current release.
51 ospfNbrStateChange
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
ospfNbrIpAddr—The IP address this neighbor is using in its IP Source Address. Note that, on address-less
links, this will not be 0.0.0.0, but the address of another of the neighbor's interfaces.
ospfNbrAddressLessIndex—On an interface having an IP Address, zero. On address-less interfaces, the cor-
responding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the
instance.
ospfNbrRtrId—A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router
in the Autonomous System.
ospfNbrState—The State of the relationship with this Neighbor.
52 ospfVirtNbrStateChange
ospfRouterId—A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to
ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
ospfVirtNbrArea—The Transit Area Identifier.
ospfVirtNbrRtrId—A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
ospfVirtNbrState—The state of the Virtual Neighbor Relationship.
page 10-22
Objects
pethPsePort-
PowerMain-
tenanceStatus
pethMainPseC-
onsumption-
Power
pethMainPseC-
onsumption-
Power
ospfRouterId
ospfNbrIpAddr
ospfNbrAd-
dressLessIn-
dex
ospfNbrRtrId
ospfNbrState
ospfRouterId
ospfVirtN-
brArea
ospfVirtN-
brRtrId
ospfVirtN-
brState
OmniSwitch 6800/6850/9000 Switch Management Guide
Family Description
module Indicates the status of the power
maintenance signature for inline
power.
module Indicates that the power inline
usage is above the threshold.
module Indicates that the power inline
usage is below the threshold.
ospf Indicates a state change of the
neighbor relationship.
ospf Indicates a state change of the
virtual neighbor relationship.
Using SNMP
December 2007