Configuring The Switch With Webview; Accessing Webview - Alcatel-Lucent OmniSwitch 6800 Series Management Manual

Configuring the Switch With WebView

Configuring the Switch With WebView
The following sections provide an overview of WebView functionality. For detailed configuration proce-
dures, see other chapters in this guide, the OmniSwitch 6800/6850/9000 Network Configuration Guide, or
the OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide.

Accessing WebView

WebView is accessed using any of the browsers listed on
stored on the switch. To access WebView and login to a switch:
1
Open a web browser.
2
Enter the IP address of the switch you want to configure in the browser Address field and press Enter.
The login screen appears.
3 Enter the appropriate user ID and password at the login prompt (the initial user name is admin and the
initial password is switch) and click Login. After successful login, the Chassis Management Home Page
appears.
Note. You can access WebView through any NI on the switch.
To configure a feature in WebView, click on the feature icon in the toolbar on the left side of the screen.
The first page displayed is the Home Page. Each configuration feature in WebView has a Home Page and
a number of configuration pages. The Home Page provides an overview of the feature and its current
configuration. The configuration pages are used to configure the feature.
page 9-8
WebView Login Page
OmniSwitch 6800/6850/9000 Switch Management Guide
page 9-1. All of the necessary WebView files are
Using WebView
December 2007