Alcatel-Lucent OmniSwitch 6800 Series Management Manual page 241

Hide thumbs Also See for OmniSwitch 6800 Series:
Table of Contents

Advertisement

Using SNMP
No. Trap Name
5
entConfigChange
6
aipAMAPStatusTrap
aipAMAPLastTrapReason—Reason for last change of port status. Valid reasons are 1 (port added), 2 (change
of information on existing port), 3 (port deleted), and 4 (no trap has been sent).
aipAMAPLastTrapPort—The ifindex number of the port that most recently changed.
7
aipGMAPConflictTrap
aipGMAPLastTrapReason—Reason for last GMAP update to not be applied. Valid reasons are 1 (Target
VLAN is an authenticated VLAN), 2 (update would conflict with a binding rule), 3 (update would create two
different VLAN entries for the same protocol), 4 (update would create two different protocol entries for the
same VLAN), 5 (target VLAN is not mobile), and 6 (no trap has been sent).
aipGMAPLastTrapPort—The ifindex number of the last port on which the GMAP was not applied because of
a conflict.
aipGMAPLastTrapMac—The last MAC address for which a GMAP change was not
applied because of a conflict.
aipGMAPLastTrapProtocol—The protocol identifier of the last GMAP change that was not applied because
of a conflict.
aipGMAPLastTrapVlan—The VLAN identifier of the last GMAP change that was not applied because of a
conflict.
Note: This trap (GMAP) is not supported on OmniSwitch 6800/6850/9000 switches in the current release.
8
policyEventNotification
policyTrapEventDetailString—Details about the event that took place.
policyTrapEventCode—The code of the event.
OmniSwitch 6800/6850/9000 Switch Management Guide
Objects
Family
none
module
aipAMAPLast-
aip
TrapReason
aipAMAPLast-
TrapPort
aipGMAPLast-
aip
TrapReason
aipGMAPLast-
TrapPort
aipGMAPLast-
TrapMac
aipGMAPLast-
TrapProtocol
aipGMAPLast-
TrapVlan
policyTrapE-
qos
ventDetail-
String
policyTrapE-
ventCode
December 2007
SNMP Overview
Description
An entConfigChange notification
is generated when a conceptual
row is created, modified, or
deleted in one of the entity
tables.
The status of the Alcatel-Lucent
Mapping Adjacency Protocol
(AMAP) port changed.
Indicates a Group Mobility
Advertisement Protocol (GMAP)
port update conflict.
The switch notifies the NMS
when a significant event happens
that involves the policy manager.
page 10-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 6850 seriesOmniswitch 9000 series

Table of Contents