AMT Datasouth AMTACCEL-5350 User Manual page 217

Table D-6. Epson and IBM Escape Sequences––continued
Function
Print character string .......
(continued)
Print character ..................
Alternate .........................
Enable/disable characters
with codes 128-159, 255
Enable ............................
Disable ...........................
Enable/disable characters .
with codes below 32
Enable
Disable ...........................
Select characters for .........
codes above 159
Italics ..............................
Graphics .........................
Bold printing
Start ................................
End .................................
Shadow printing
Start ................................
Start (alternate) ...............
Start (alternate) ...............
End .................................
End (alternate) ................
End (alternate) ................
ASCII Hexadecimal
Text Functions––continued
ESC \ n1 n2 1B 5C n1 n2
list list
ESC [ n 1B 5B n
ESC ^ n 1B 5E n
ESC 6 1B 36
ESC 7 1B 37
ESC I n 1B 49 n
ESC I 1 1B 49 31
ESC I 0 1B 49 30
ESC t n 1B 74 n
ESC t 0 1B 74 30
ESC t 1 1B 74 31
ESC G 1B 47
ESC H 1B 48
ESC E 1B 45
ESC q 1 1B 71 31
ESC u STX 1B 75 02
ESC F 1B 46
ESC q 0 1B 71 30
ESC u NUL 1B 75 00
Decimal
27 92 n1 n2 The list is a series of character codes for the characters to
list print. For example, to print the characters assigned codes
10 through 20 decimal, the correct sequence is 27 92 11 0
10 11 12 13 14 15 16 17 18 19 20 (decimal).
Note: This sequence is not supported when an Epson
emulation is active.
27 91 n These sequences print a character that is assigned a valid
27 94 n control code. The value of variable n in the sequence is
the control code assigned to the character. For example,
to print the music note symbol assigned to the CR control
code, the correct sequence is ESC [ CR or ESC ^ CR.
Note: The ESC [ n sequence is not supported when the
IBM XL24 emulation is active.
These sequences enable and disable the printing of inter-
national characters assigned to codes 128 through 159 and
27 54 255. When disabled, the printer performs the control
27 55 functions assigned to these codes.
27 73 n This sequence enables/disables the printing of char-
acter codes 0 to 6, 16, 21, 22, 23, 25, 26, 28, 29, 30,
27 73 49 and 31 decimal.
27 43 48
Note: This sequence is not supported when the IBM
XL24 emulation is active.
27 116 n This sequence sets the characters that print for codes
above 159. The sequence can set either the italic ASCII
27 116 48 characters or the normal IBM graphic characters. With
27 116 49 italic characters selected, add 128 to the normal character
code to print the italicized version. For example, to print
an italicized letter A (code 65 decimal), send code 193
(65 + 128 = 193).
These sequences start and end bold printing at the current
27 71 print position. For bold, the printer prints each character
27 72 twice at the character's normal print position (this requires
a second printing pass over the line).
These sequences start and end shadow printing at the cur-
27 69 rent print position. For shadow, the printer prints each
27 113 49 character twice--once at the character's normal print posi-
27 117 2 tion, and once 1/120-inch to the right of this position
27 70 (this requires a second printing pass over the line).
27 113 48
27 117 0
User's Guide
Description
Code Sets D-39