AMT Datasouth AMTACCEL-5350 User Manual page 59

Setting Page Length––continued
Ordinarily, software applications set page length for you. If you experi-
ence one of these problems, you may have to set the page length manu-
ally.
To set the page length, use the following procedure:
1. Press the Setup button on the control panel to access the Setup menu.
Then, turn the Select-dial until the LENG parameter appears on the
display.
2. While holding down the Alt button, turn the Select-dial until the
LENG setting equals the actual page length in 1/6-inch increments.
For example, if the actual page length is 14 inches, the setting would
be 84 (14" x 6). Then, release the Alt button.
3. Press the Setup button to return to the status message.
Note: The page length setting is defined in one-sixth inch increments
regardless of the current lines per inch setting.
User's Guide
Loading Paper 3-15