AMT Datasouth AMTACCEL-5350 User Manual page 225

Table D-6. Epson and IBM Escape Sequences––continued
Function
Print single-density ............
graphics
Print low-speed, double- ...
density graphics
Print high-speed, double- ..
density graphics
Print quadruple-density ....
graphics
Reassign alternate .............
graphics mode
ASCII Hexadecimal
Graphic Functions––continued
ESC K n1 n2 1B 4B n1 n2
list list
ESC L n1 n2 1B 4C n1 n2
list list
ESC Y n1 n2 1B 59 n1 n2
list list
ESC Z n1 n2 1B 5A n1 n2
list list
ESC ? n1 n2 1B 3F n1 n2
Decimal
27 75 n1 n2 This sequence prints single-density graphics at 72V x 60H
list dots per inch. Variables n1, n2 and list in the sequence
operate the same as in the Print Epson JX Graphics
sequence.
27 76 n1 n2 This sequence prints low-speed, double-density graphics
list at 72V x 120H dots per inch. Variables n1, n2 and list in
the sequence operate the same as in the Print Epson JX
Graphics sequence.
27 89 n1 n2 This sequence prints high-speed, double-density graphics
list at 72V x 120H dots per inch. Variables n1, n2 and list in
the sequence operate the same as in the Print Epson JX
Graphics sequence. In this graphics mode, consecutive
horizontal dots are not permitted. If the sequence
specifies consecutive horizontal dots, the printer does not
print the second dot.
27 90 n1 n2 This sequence prints quadruple-density graphics at
list 72V x 240H dots per inch. Variables n1, n2 and list in
the sequence operate the same as in the Print Epson JX
Graphics sequence. In this graphics mode, consecutive
horizontal dots are not permitted. If the sequence
specifies consecutive horizontal dots, the printer does not
print the second dot.
27 63 n1 n2 This sequence reassigns the function of ESC K, ESC L,
ESC Y, or ESC Z, so that it performs any one of the other
six Epson graphics modes. Variable n1 defines which
sequence to reassign:
Sequence
to Reassign
ESC K
ESC L
ESC Y
ESC Z
Variable n2 defines which graphics mode to assign to the
selected sequence:
Mode
Single
Double
HS double
Quadruple
Epson QX-10 72V x 80H dpi
One-to-one
Other CRTs 72V x 90H dpi
User's Guide
Description
Variable n1
ASCII Hex Dec
K 4B 75
L 4C 76
Y 59 89
Z 5A 90
Variable n2
Resolution ASCII Hex Dec
72V x 60H dpi NUL 00
72V x 120H dpi SOH 01
72V x 120H dpi STX 02
72V x 240H dpi ETX 03
EOT 04
72V x 72H dpi ENQ 05
ACK 06
Code Sets D-47
0
1
2
3
4
5
6