Universal Battery Charger (Ubc) Adapter; Setup; Spare Battery Charging - Symbol MC3000 Integrator Manual

Universal Battery Charger (UBC) Adapter

The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station
UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick
Reference Guide, p/n 70-33188-xx.
Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See the MC3000 User Guide for
the power supply regulatory compliance statement.

Setup

Connect the UBC Adapter to a Symbol approved power source.
AC Line Cord

Spare Battery Charging

To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
Figure 2-17. UBC Adapter Setup
Accessories 2-19
Power Port
DC Cable
Power Supply