Universal Battery Charger (Ubc) Adapter; Setup; Battery Insertion And Removal - Symbol MC50 Integrator Manual

Universal Battery Charger (UBC) Adapter

This section describes how to use the UBC adapter to charge a spare battery.
Use the UBC with a power supply as a standalone spare battery charger, or with the four station UBC2000 to simultaneously charge
up to four spare batteries. For additional information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide
(p/n 70-33188-xx).

Setup

AC Line Cord

Battery Insertion and Removal

Insert the battery into the battery well with the charging contacts on the battery aligning with the charging pins on the adapter, and
gently press down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.
Battery Well
Battery Release
Figure 2-18. UBC Adapter Power Connection
Battery
Figure 2-19. UBC Adapter
Power Port
Power Supply
UBC Adapter
POWER
READY
(Green)
CHARGING or STANDBY or FAULT
(Flashing Yellow)
(Solid Yellow) (Flashing Yellow)
Accessories 2-19