7
Selecting the setting for crisscross feeding ("CRISSCROSS MODE"
parameter)
Note
The setting for crisscross feeding cannot be selected if optional shift tray
SF-501 is installed.
1
Display the "COPY SETTING 2" menu.
–
Refer to "Displaying the "COPY SETTING 2" menu" on page 7-73.
2
Press the [+] or [,] key until "CRISSCROSS MODE" is selected, and
then press the [OK] key.
7-82
UTILITY MODE
COPY SETTING 2
RETURN
COPY SETTING 2
MIXED ORIGINAL
DUPLEX COPY
CRISSCROSS MODE
Utility mode/Copy mode parameters
bizhub 163/211