Installation Precautions; Installation Site; Power Source - Konica Minolta bizhub 163 User Manual

Installation and operation precautions
2.3

Installation precautions

Installation site

Observe the following precautions to maintain the machine in its best
possible condition.
To ensure utmost safety and prevent possible malfunctions, install the
machine in a location that meets the following requirements:
- A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust
from the machine
- A location that is not near any kind of heating devices

Power source

The power source requirements are as follows.
- Voltage fluctuation:
AC220-240 V ±10%
- Frequency fluctuation:
Within ±3Hz
Use a power source with as few voltage or frequency fluctuations as
possible.
bizhub 163/211
2
2-19