7
Selecting the default "MIXED ORIGINAL" setting ("MIXED ORIGINAL"
parameter)
Note
A setting can be selected for this parameter only if the optional document
feeder or reverse automatic document feeder is installed.
1
Display the "COPY SETTING 2" menu.
–
Refer to "Displaying the "COPY SETTING 2" menu" on page 7-73.
2
Press the [+] or [,] key until "MIXED ORIGINAL" is selected, and then
press the [OK] key.
7-78
UTILITY MODE
COPY SETTING 2
RETURN
COPY SETTING 2
MIXED ORIGINAL
DUPLEX COPY
CRISSCROSS MODE
Utility mode/Copy mode parameters
bizhub 163/211