Utility mode/Copy mode parameters
Changing the print density ("PRINT DENSITY" parameter)
1
Display the "MACHINE SETTING" menu.
–
Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2
Press the [+] or [,] key until "PRINT DENSITY" is selected, and then
press the [OK] key.
3
Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The "MACHINE SETTING" menu appears again.
bizhub 163/211
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(ADF)
DENSITY(BOOK)
PRINT DENSITY
PRINT DENSITY
OK
7-15
7