Utility mode/Copy mode parameters
Selecting the setting for crisscross feeding ("CRISSCROSS MODE" pa-
rameter)
Note
The setting for crisscross feeding cannot be selected if optional shift tray
SF-501 is installed.
1
Display the "COPY SETTING 2" menu.
–
Refer to "Displaying the "COPY SETTING 2" menu" on page 6-68.
2
Press the [+] or [,] key until "CRISSCROSS MODE" is selected, and
then press the [OK] key.
3
Press the [+] or [,] key until "OFF" or "ON" is selected, and then press
the [OK] key.
The "COPY SETTING 2" menu appears again.
bizhub 181
6
6-75