7
Changing the display contrast ("LCD CONTRAST" parameter)
1
Display the "MACHINE SETTING" menu.
–
Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2
Press the [+] or [,] key until "LCD CONTRAST" is selected, and then
press the [OK] key.
3
Press the [*] or [)] key until the desired contrast is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
7-16
UTILITY MODE
MACHINE SETTING
PAPER SOURCE SETUP
CUSTOM SIZE MEMORY
MACHINE SETTING
LCD CONTRAST
KEY SPEED SETTING
LANGUAGE
LCD CONTRAST
Utility mode/Copy mode parameters
OK
bizhub 163/211