Konica Minolta bizhub 163 User Manual page 274

7
4
Use the keypad to type in width to be erased, and then press the [OK]
key.
– The width of the area to be erased can be set between 5 and
20 mm.
– To correct the entered number, press the [Clear/Stop] key, and then
use the keypad to type in the correct number.
The "COPY SETTING 1" menu appears again.
7-70
ERASE SETTING(LEFT)
10mm(5-20mm)
Utility mode/Copy mode parameters
bizhub 163/211