Utility mode/Copy mode parameters
Adjusting the width of the erased area ("ERASE SETTING" parameter)
1
Display the "COPY SETTING 1" menu.
–
Refer to "Displaying the "COPY SETTING 1" menu" on page 7-57.
2
Press the [+] or [,] key until "ERASE SETTING" is selected, and then
press the [OK] key.
3
Press the [+] or [,] key until "LEFT", "UPPER" or "FRAME" is selected,
and then press the [OK] key.
bizhub 163/211
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
COPY SETTING 1
ERASE SETTING
SMALL ORIGINAL
RETURN
ERASE SETTING
LEFT
UPPER
FRAME
7
7-69