Konica Minolta bizhub 163 User Manual page 316

9
Symptom
The edge of the copy is
dirty.
The image is not aligned
properly on the paper.
9-4
Possible Cause
Is the document pad dirty?
Was the selected paper size
larger than the document?
(when copying at full size)
Are the document size and paper
orientation different?
(when copying at full size)
Was the copy reduced to a size
smaller than the paper?
(when copying at a reduced size
specified manually)
Is the document incorrectly posi-
tioned?
Is the document incorrectly posi-
tioned in the document feeder?
Are the adjustable document
guides incorrectly positioned
against the edges of the docu-
ment?
Was curled paper loaded into the
paper drawer?
Troubleshooting
Remedy
Clean the document pad with a
soft cloth dampened with a mild
detergent. (See page 10-9.)
Select a paper size that is the
same size as the document. (See
page 5-13.)
Otherwise, select the "AUTO"
Zoom setting to enlarge the copy
to the selected paper size. (See
page 5-54.)
Select a paper size that is the
same size as the document. Oth-
erwise, select a paper orientation
that is the same as that of the
document.
Select a zoom ratio that adjusts
the document size to the select-
ed paper size. (See page 5-55.)
Otherwise, select the "AUTO"
Zoom setting to reduce the copy
to the selected paper size. (See
page 5-54.)
Correctly position the document
against the document scales.
(See page 4-19.)
If the document feeder is in-
stalled, correctly adjust the doc-
ument guides for the size of the
document. (See page 4-18.)
Lift open the document feeder,
and correctly position the docu-
ment against the document
scales. (See page 4-19.)
Slide the document guides
against the edges of the docu-
ment.
Flatten the paper before loading
it into the paper drawer.
bizhub 163/211