Problems Relating To Images - Epson EB-455Wi User Manual

Problem Solving

Problems relating to images

No images appear
Check
Did you press the [t] button?
Are all of the indicators off?
Is A/V Mute active?
Are the Configuration Menu settings correct?
Is the projected image completely black?
Only when projecting computer images
Is the image signal format setting correct?
Only when projecting images from a video source
Moving images are not displayed
Check
Is the computer's image signal being output to the LCD and the
monitor?
Only when projecting images from a laptop computer or a computer
with a built-in LCD screen
Projection stops automatically
Check
Is Sleep Mode set to On?
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied.
Check the breaker and so on to ensure power is being supplied.
If the lamp cover or the lamp are not installed correctly, the lamp will not turn on.
Check that the lamp cover and lamp are installed properly. s
Press the [A/V Mute] button on the remote control to cancel A/V Mute. s
Reset all of the settings. s Reset Menu - Reset All
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal
Change the image signal to external output only. s See the documentation supplied with the computer or contact the
maker of the computer.
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off. s Extended
Menu - Operation - Sleep Mode p.78
Remedy
p.112
p.40
p.91
Remedy
Remedy
98
p.75