Smoothes out rough images. There are two modes. Select your favorite setting. Set this to Off when viewing image sources in which noise is very low,
such as DVDs.
You can select an input signal from Computer1/2 input port.
If this is set to Auto, the input signal is set automatically depending on the connected equipment.
If colors do not appear correctly when this is set to Auto, select the appropriate signal depending on the connected equipment.
You can select the input signal from the Video input port. If this is set to Auto, video signals are recognized automatically. If interference appears in the
image or a problem occurs such as no image is being projected when set to Auto, select the appropriate signal depending on the connected equipment.
g
You can set the Aspect Ratio
for projected images. s
You can reset all adjustment values in the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s
You can correct keystone distortion in the vertical direction.s Quick Start Guide
You can adjust Tele/Wide.
You can use this to restrict operation of the projector's Control panel. s