Epson EB-455Wi User Manual page 79

List of Functions
Submenu
Standby Setup
USB Type B
Language
Reset
*1 When User's Logo Protect is set to On in Password Protect, settings related to user's logo cannot be changed. You can make changes after setting User's Logo Protect to
Off. s p.50
*2 Audio is not output while Power On Protect from Password Protect is set to On.
*3 Except for "High Altitude Mode".
Standby Mode: You can use the following functions even when the projector is in standby mode if this is set to Communication
On.
• Monitor and control the status of the projector over the network.
g
You can use SNMP or the dedicated application software "EasyMP Monitor" to monitor and control the status of the projector over the
network.
• Output audio from the projector's speaker when a microphone is connected to the Mic input port.
(Only when Standby Microphone is set to On.)
• Output audio from the projector's speaker for equipment connected to the audio input port.
(Only when Standby Audio is set to On.)
Standby Microphone: (This can only be set if Standby Mode is set to Communication On.)
Set whether mic input is enabled (On) or disabled (Off).
Standby Audio: (This can only be set if Standby Mode is set to Communication On.)
Set whether audio input is enabled (On) or disabled (Off).
Set this to USB Display when the projector and a computer are connected with a USB cable and computer images are projected.
s Quick Start Guide
Set this to Wireless Mouse when the mouse pointer is to be operated by the remote control. s
Set this to Off when using only Easy Interactive Function (EB-465i/455Wi only). s
You can set the Language to use for displaying messages and menus.
You can return the adjustment values for Display
To return all menu items to their default settings, see s
Function
*1 *3
and Operation in the Extended menu to their default settings.
p.91
*2
*2
p.48
p.54
79