Problem Solving
Check
Is direct sunlight or strong light from fluorescent lamps shining onto
the Remote Receiver?
Is the remote receiver set correctly?
Are the batteries dead or have the batteries been inserted in the
wrong direction?
I want to change the language for messages and menus
Check
Change the language setting.
Set the projector up in a location where strong light does not shine onto the Remote Receiver. Or set the remote receiver
to Off from Remote Receiver in the configuration menu. s Settings Menu - Remote Receiver
Check the Remote Receiver from the Configuration Menu. s Settings Menu - Remote Receiver
Insert new batteries in the correct direction. s
Change the Language setting from the Configuration Menu. s
Remedy
p.111
Remedy
p.78
106
p.76
p.76