Wired Lan Menu - Epson EB-455Wi User Manual

List of Functions

Wired LAN menu

Sub-menu
IP Settings
IP Address Display
You can make settings related to the following addresses.
g
DHCP : Select whether or not (On/Off) to use DHCP. If this is set to On, you cannot set any more addresses.
g
IP Address : You can input the IP address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the
following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
g
Subnet Mask : You can input the subnet mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
g
Gateway Address : You can input the IP address of the gateway for the projector. You can input a number from 0 to 255 in each field of the address.
However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
Function
86