Using the Mail Notification Function to Report Problems
By setting the Mail Notification function from the projector's Configuration
Menu, notification messages will be sent to the preset email addresses when
a problem or warning occurs with a projector. This will enable the operator
to be notified of problems with projectors even at locations away from the
projectors.
"Network Menu" p.80, "Mail menu"
s
• Up to a maximum of three notification destinations (Addresses) can
q
be recorded, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• Monitoring is possible if Extended - Standby Setup - Standby
Mode is set to Network On from the projector's Configuration
menu, even if the projector is in standby mode (when the power is
off).
p.87
67