Table of Contents
Advertisement
Immobilizer System, Ignition Switch
If the system repeatedly does not
recognize the coding of your key or
keyless access remote, contact your
dealer.
Do not attempt to alter this system
or add other devices to it. Electrical
problems could result that may make
your vehicle inoperable.
If you have lost your key or keyless
access remote and you cannot start
the engine, contact your dealer.
Always take the ignition key or the
keyless access remote with the built-in
key with you whenever you leave the
vehicle alone.
This device complies with the
appropriate requirements or the
required standards. See page
more information.
150
Ignition Switch
On models without keyless access
system
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
LOCK (0)
remove the key only in this position.
To turn the key, you must push the
628
for
key in slightly. The shift lever must
also be in Park.
You can insert or
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
ACCESSORY (I)
You can
operate the audio system and the
accessory power sockets in this
position.
ON (II)
This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
START (III)
Use this position
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
Advertisement
Chapters
Table of Contents
