Table of Contents
Advertisement
Replacing the Front Side Marker
Light Bulb
1.
Start the engine. If you are
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.
HOLDING CLIP
2.
Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back.
BOLT
BOLT
UNDER COVER
HOLDING CLIP
3.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver.
4.
Pull down the under cover from
the bumper carefully.
Lights
CONTINUED
557
Advertisement
Chapters
Table of Contents
