Additional Information About Your Seat Belts; Seat Belt System Components - Acura 2014 TL Owner's Manual

Additional Information About Your Seat Belts

Seat Belt System Components

Your seat belt system includes lap/
shoulder belts in all seating positions.
The front seat belts are also
equipped with automatic seat belt
tensioners.
20
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passengers to
fasten your seat belts.
This system monitors the front seat
belts. If you turn the ignition switch
to the ON (II) position before your
seat belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator will
stop flashing but remain on.
You will also see a ''FASTEN SEAT
BELT'' message on the multi-
information display.
If a front passenger does not fasten
their seat belt, the indicator will
come on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either the driver or a front
passenger does not fasten their seat
belt while driving, the beeper will
sound and the indicator will flash
again at regular intervals.
You will also see a ''FASTEN SEAT
BELT'' or ''FASTEN PASSENGER
SEAT BELT'' message on the multi-
information display.
When no one is sitting in the front
passenger's seat, or an infant or
small child is riding there, the
indicator may not come on and the
beeper may not sound.
: Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
184 and 187 .