Table of Contents
Advertisement
BATTERY
3.
Place a cloth on the edge of the
keypad to prevent scratches, and
remove the upper half by carefully
prying on the edge with a small
flat-tip screwdriver or coin.
4.
Remove the old battery and note
the polarity. Make sure the
polarity of the new battery is the
same (
side facing up), then
insert it in the keypad.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations for
battery disposal.
5.
Snap the two halves of the keypad,
then install the parts in reverse
order.
Remote Transmitter
This device complies with the
appropriate requirements or the
required standards. See page
more information.
628
for
159
Advertisement
Chapters
Table of Contents
