Acura 2014 TL Owner's Manual page 255

You can store up to 12
Preset
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the button. Either
XM1 or XM2 will show in the
display.
2. Use the selector knob, or the
CATEGORY bar or SCAN button
to tune to a desired channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3. Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
Playing the XM Radio (Models without navigation system)
Repeat steps 2 and 3 to store the
4.
first six channels.
5. Press the button again.
The other XM band will show.
Store the next six channels using
steps 2 and 3.
Once a channel is stored, simply
press and release the proper preset
button to tune to it.
XM Radio Display Messages
XM is loading the
''LOADING''
audio or program information.
''OFF AIR'' The channel
currently selected is no longer
broadcasting.
''UPDATING'' The encryption
code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.
''NO SIGNAL'' The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
CONTINUED
249