Table of Contents
Advertisement
HOLDING CLIP
COVER
2.
Use a flat-tip screwdriver to
remove the holding clips from the
edge of the inner fender cover,
and pull the inner fender cover
back.
BOLT
BOLT
HOLDING CLIP
UNDER COVER
3.
Use a wrench to remove the
mounting bolts, and remove the
holding clip with a flat-tip
screwdriver.
Pull down the under cover from
the bumper carefully.
CONNECTOR
4.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
5.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Lights
BULB
CONTINUED
561
Advertisement
Chapters
Table of Contents
