Table of Contents
Advertisement
Ignition Switch
On models without keyless access
system
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
150
LOCK (0) － You can insert or
remove the key only in this position.
To turn the key to the LOCK (0)
position, the shift lever must be in
Park, and you must push the key in
slightly.
If the front wheels are turned, the
anti-theft lock may make it difficult to
turn the key. Firmly turn the steering
wheel to the left or right as you turn
the key.
ACCESSORY (I) － You can operate
the audio system and the accessory
power sockets in this position.
ON (II) － This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
2010 ZDX
START (III) － Use this position
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver's door. Remove the key to
turn off the beeper.
You will also see a ''REMOVE KEY''
message on the multi-information
display.
The shift lever must be in Park
before you can remove the key from
the ignition switch.
Advertisement
Table of Contents
