Replacing the Remote Battery
Replace the battery if necessary.
Battery type: CR2032
To replace the battery:
1.
Remove the built-in key (see page
201
).
2.
Place a cloth on the edge to
prevent scratches, then remove
the upper half by carefully prying
on the edge with a coin.
3.
Replace the old battery with a new
battery. Place the battery so the
side is facing up. Snap the two
halves of the remote case back
together.
An improperly disposed of battery
can hurt the environment.
Always confirm local regulations for
battery disposal.
Keyless Access System
This device complies with the
appropriate requirements or the
required standards. See page
more information.
628
for
181