Table of Contents
Advertisement
WING BOLT
For compact
spare tire
SPACER CONE
17.
Place the flat tire face down in the
spare tire well.
18.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
For normal
tire
To remove the spacer cone,
squeeze the tabs on the wing bolt
to disengage it from the center of
the spacer cone, then pull the bolt
downward.
To install the wing bolt to the
spacer cone, reverse this
procedure.
19.
Secure the flat tire by screwing
the wing bolt back into its hole.
20.
Store the jack and tools in the tool
SPACER CONE
kit case. Place the tool kit case in
the flat tire.
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
TAB
securely before driving.
21.
Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.
Lower the trunk floor, then close
the trunk lid.
22.
Your vehicle's original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to
Changing a Tire with TPMS
page
Changing a Flat Tire
518
).
(see
587
Advertisement
Chapters
Table of Contents
