Audio System - Acura 2014 TL Owner's Manual

Audio System (Models without navigation system)
Selector Knob
SETUP BUTTON
RETURN
SELECTOR
BUTTON KNOB
Most audio system functions can be
controlled by standard buttons, bars,
and knobs. In addition, you can
access some functions by using the
selector knob on the audio system.
236
The knob turns left and right. Use it
to scroll through lists, or to make
selections or adjustments to a list or
menu item on the display. When you
make a selection, push the center of
the selector (ENTER) to go to that
selection.
When the audio system is in XM
Radio mode or playing discs, pushing
the selector (ENTER) knob switches
the display between the normal
display and the extended display.
The extended display has three
segments to display the detailed
information.
SETUP Display
To select any setting such as the
clock or sound adjustment, press the
SETUP button. To use any audio
system function, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position. You can select the
item by turning the selector knob.
To go back to the previous display,
press the RETURN button.
Pressing the SETUP button again
will also cancel the setup display
mode.
Personalization Setting
When you unlock the doors with
your remote transmitter and turn the
audio system on with the ignition
switch in the ACCESSORY (I) or ON
(II) position, the driver's ID (Driver
1 or Driver 2) is detected, and the
radio presets and sound level
settings (see page 243 ) are turned to
the respective memorized mode
automatically.