Acura 2014 TL Owner's Manual page 566

Lights
6. Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
7. Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
8. Turn on the lights to make sure
the new bulb is working.
9. Push the under cover in place and
set the inner fender cover in the
original position. Install the bolts
and tighten them securely. Insert
each holding clip, and lock it by
pushing on its center.
560
Replacing a Front Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be required.
Adjustment should be done by your
dealer or another qualified
technician.
1. Start the engine. If you are
replacing a driver's side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger's side bulb, turn the
steering wheel to the left. Turn off
the engine.