Acura 2014 TL Owner's Manual page 541

These messages will come on every
time you turn the ignition switch to
the ON (II) position.
: Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
184 and 187 .
Immediately have the service
performed, and make sure to reset
the display as described on page
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
. Press the SEL/RESET button on the
537
steering wheel repeatedly to select
the engine oil life. The message
''SERVICE,'' along with ''0%,'' and the
maintenance item code are displayed
on the multi-information display
when the calculated engine oil life is
0 to 1 percent.
Maintenance Minder
TOTAL PAST DUE DISTANCE
TRAVELED
U.S.
MAINTENANCE CODES
Canada
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
''SERVICE PAST DUE'' message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).
TM
CONTINUED
535