Changing A Flat Tire - Acura 2014 TL Owner's Manual

Changing a Flat Tire

JACK WHEEL NUT
WRENCH
EXTENSION
4. Take the tool case out of the spare
tire.
5. Unscrew the wing bolt and take
the spare tire out of its well.
6. Take the jack out of the tool kit
case.
7. Place blocks in front and back of
the wheel diagonally opposite the
tire you are changing.
584
WHEEL NUT WRENCH
8. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
JACKING POINTS
9. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.