Acura 2014 TL Owner's Manual page 110

Multi-Information Display
Adjust Outside Temp. Display
If you sometimes find that the
temperature reading is a few
degrees above or below the actual
temperature, you can adjust it by
following these instructions:
You can choose this item to
customize from ''METER SETUP''
by pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to
enter the setting.
104
U.S. models Canadian models
The displayed number is the current
adjustment above or below the
outside temperature.
Adjust the outside temperature value
by pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET
button to set the desired value.
U.S. models Canadian models
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ''SETTING INCOMPLETE''
message appears, go back to
''ADJUST OUTSIDE TEMP.
DISPLAY'' and repeat the procedure
again.