Memory; Send File - AMX LCD Mini-Touch Panels Instruction Manual

Figure 153
Decision box
Figure 154
Available memory blocks
message
Figure 155
Used memory blocks message
Note
The send file step is not
required if the mini-touch panel
is connected directly to the
AXCESS Control System.
100 Mini-Touch Panel Program Reference
• ENTER Erases (deletes) drawing and returns to the current page.
DO YOU WANT TO DELETE
ALL
YES
OF THE DRAWINGS ?
• YES
Erases all drawings from mini-touch panel memory and returns to the
Main page.
• NO
Cancels the deletion process and returns to the current page.

Memory

Press the MEMORY option to open the message box in Figure 154 to show the
number of memory blocks available to create pages and buttons.
THE NUMBER OF AVAILABLE
MEMORY BLOCKS 3198
TOUCH SCREEN TO CONTINUE
Press the screen again to open the memory blocks used message box shown in
Figure 155. This message shows the number of used memory blocks.
THE NUMBER OF MEMORY BLOCKS
USED BY USER 88
TOUCH SCREEN TO CONTINUE

Send file

Press the SEND FILE option to open the decision box shown in Figure 156. You can
send files to a PC using the AXlink or RS-232 4-pin header on the mini-touch panel.
The target PC must be running the TPDOC or TPDesign software program before
you send the mini-touch panel drawings. Refer to TPDOC or TPDesign instruction
manuals for more information.
NO
Black/White LCD Mini-Touch Panels