Receive File - AMX LCD Mini-Touch Panels Instruction Manual

Figure 156
Drawing layout decision box
Figure 157
Transfer type decision box
Figure 158
Start the transfer decision box
Note
The PC must be running
TPDOC or TPDesign before
you can send a mini-touch
panel file.
Note
The receive file step is not
required if the mini-touch panel
is connected directly to the
AXCESS Control System.
Black/White LCD Mini-Touch Panels
DO YOU WANT TO SEND
YES
THE DRAWING LAYOUT
FILE WITH THE SYSTEM ?
• YES
Sends the drawing file to the PC and opens the decision box in
Figure 157.
• NO
Cancels the drawing file transfer and opens the decision box in
Figure 157.
PRESS YES FOR BUS
YES TRANSFER. PRESS NO
FOR RS232.
• YES
Sends the file to the PC over the AXlink connector on the mini-touch
panel, and opens the decision box in Figure 158.
• NO
Sends the file to the PC over the RS-232 4-pin header on the mini-touch
panel (UniMount, rack-mount, and wood models only), and opens the
decision box in Figure 158.
PRESS YES TO START
THE UPLOAD AND NO TO
YES
QUIT.
• YES
Sends the mini-touch panel files to the PC. During the upload process,
you can press the EXIT button to cancel the file transfer and return to the
current page.
• NO Cancels the file transfer and returns to the current page.

Receive file

Press the RECEIVE FILE option to open the decision box in Figure 159.
NO
NO
NO
Mini-Touch Panel Program Reference 101