Applications - AMX LCD Mini-Touch Panels Instruction Manual

Figure 3
Sample AXU-MLC/PB mini-
touch panel and AXCESS
Control System
Note
The mouse can be used to
design mini-touch panel pages
and then removed prior to
installation.
Black/White LCD Mini-Touch Panels

Applications

The mini-touch panels can control a wide variety of equipment connected to the
AXCESS CardFrame, the internal RS-232 port (UniMount and rack-mount panels
only), or a combination of both. Figure 3 shows a sample AXU-MLC mini-touch
panel and AXCESS Control System configuration.
Television VCR
The AXT-MLC (/PB) and AXW-MLC (/PB) mini-touch panels use a 4-pin (male)
mini-XLR connector for power and data, and the AXU-MLC (/PB) and AXM-MLC
(/PB) mini-touch panels use a 4-pin AXlink connector for power and data. The mini-
touch panels connect to an AXCESS Control System, AXCENT 2 Integrated AXCESS
Control System, or the AXB-EM232 Enhanced Master/RS-232 Controller. You can
also connect an optional Microsoft or Logitech serial mouse to the RS-232 4-pin
header inside the AXU-MLC (/PB) and AXM-MLC (/PB) to design touch panel
pages and perform touch panel operations.
AXU-MLC/PB
AXlink cable
AXCESS CardFrame
Lighting
Mouse (optional)
or internal RS-232
port
Camera
Introduction 3