Drawings - AMX LCD Mini-Touch Panels Instruction Manual

Figure 146
Drawing list example
96 Mini-Touch Panel Program Reference
NON CENTER CROSSHAIR
button with a control stick. When you move the control stick, the mini-touch
panel sends feedback (data) to the control system and to the external device to
perform a pre-programmed operation. When you remove your finger from
the screen, the control stick and external device stay in that position.
• EXIT Saves the attribute changes, closes the Attributes page, and returns to
the current page.
• EXIT NO CHANGE
returns to the current page.

Drawings

Press the DRAWING option to open the Drawing list shown in Figure 146.
* * NONE * *
AMX LOGO
VCR #1
VCR #2
ENTER
You can add drawings, layouts, and special shapes to a page. The drawings can
include hidden buttons that activate areas in the drawing. Drawings created
externally with computer-aided design ( CAD) drawing packages can be saved as
mini-touch panel files. You can also move and resize a button that contains a
drawing.
You can use the TPDOC (MS-DOS) or TPDesign (Windows) programs to import and
resize a wide variety of graphic files and then load them into your mini-touch panel.
Refer to the TPDOC or TPDesign instruction manuals for more information.
Move the highlight bar to the target drawing or ** NONE ** using the up and down
arrows. Press ENTER to select the drawing item and press the screen to place the
drawing on the page.
• Up arrow
Moves the highlight bar up.
Sets the icon to a four-quadrant crosshair
Cancels the changes, closes the Attributes page, and
Black/White LCD Mini-Touch Panels